Brochure

5
Stacking Up Your Output
Benefits
Multigraf Stacker Short Version
• Oversized sheets up to 26" (660 mm) can easily
and efficiently be stacked at the end of any
iGen Press.
• Maximum productivity with the iGen Press.
• Extra Large Paper Kit 22.5” (572 mm) or
26” (660 mm).
• Increased output and productivity on the
iGen Press.
• Uses Xerox
®
Device Feeding and Finishing
Architecture (DFA) Protocol.
Multigraf Stacker Long Version
• Increased stacking capacity and productivity
on the Epic CTi-635 Coating System.
• Cooling system dries coated sheets to prevent
sheets from sticking together in the stacker.
• Stacks oversize sheets up to 22.5" (572 mm).
Multigraf PST-52 Pile Stacker
The Multigraf PST-52 Pile Stacker is an
ideal solution for Xerox
®
iGen
®
press users
who need precision stacking of large papers
and want to simultaneously increase output
and productivity.
This inline unit provides high quality stacking
of extra large papers on an easily removable
paper trolley. The PST-52 stacker is equipped
with two standard paper trolleys. Once the
stacker is full, users simply wheel out the full
trolley, wheel in the second empty one and
continue production. Additional trolleys are
available to improve production further.
There are two models of the Multigraf
Stacker. The Short Version can be attached
to the iGen to enable stacking of sheets
up to 26" (660 mm). The Long Version is
compatible with the Epic CTi-635 Coating
System for enhanced stack quality and
stacking capacity of coated sheets up to
22.5" (572 mm). The Long Version also
includes a cooling device as an inline output
solution with Epic coating units. The cooling
device dries varnished sheets to improve
stacking quality.
Multigraf PST-52 Stacker
Production Media Cart and Power
Eject for the Xerox
®
iGen Presses
Experience a powerful combination of
efficiency and convenience in a solution built
for professional, safe transportation of printed
media from the iGen’s stacker to work tables,
pallets or nearline/offline finishing.
The Power Eject unit uses an automatically
triggered drive system to safely eject large
stacks of printed media from the printer’s
stacker to the Production Media Cart. The
Production Media Cart uses a battery powered
vertical elevation system to set the media
table height and a hand crank to transfer the
paper stack from the Cart.
Benefits:
• Handle massive print runs of the largest sheet
sizes and weights with ease.
• Create longer print runs with reduced
interruption.
• Improve operator ergonomics and efficiency.
• Minimize handling and stack integrity errors
with printed sheets.
• Enhance compatibility with Xerox
®
print
finishing solutions.
• Streamline the process from print to bindery.
• Field Upgradable—can be installed as
an upgrade to existing iGen4
®
and
iGen 150 stackers.
Production Media Cart
Xerox
®
Power Eject