Printer User Manual

HP LASERJET EMULATION MODE
Page Control commands
Paper Source
Purpose Use the Paper Source command to designate a paper tray or a
paper source sequence as the paper source for printing.
Although the HP IIISi does not support the Paper Source
command for Paper Deck, the Xerox printer does support this
command.
Syntax E& #H
where # is one of the values listed in table 2-1.
Table 2-1. Printer and HP Paper Source commands
*=default setting.
Value # HP
Printer
equivalent
Possible tray
assignments
0 Eject Page Eject Page N/A
1 Upper Tray Tray 1 Tray 1*
Tray 2
Tray 3
Tray 4
Tray 5
2 Manual Paper Tray Tray 5 Tray 5 (fixed)*
3 Manual Envelope
Tray
Tray 5 Tray 1
Tray 2*
Tray 3
Tray 4
Tray 5
4 Lower Tray Tray 2 or 3 Tray 1
Tray 2
Tray 3*
Tray 4
Tray 5
5 Paper Deck (HP
2000 only)
Tray 4 if
installed,
otherwise
Tray 1
Tray 1
Tray 2
Tray 3
Tray 4* if
installed
Tray 5
6 Envelope Feeder Tray 5 Tray 5 (fixed)*
XEROX MRP FAMILY PCL 5 AND POSTSCRIPT PRINTER LANGUAGE REFERENCE 2-3