Printer User Manual

HP LASERJET EMULATION MODE
Job Control commands
Job Separation
Purpose Use the Job Separation command to offset one print job from
others in the output tray.
Syntax E& #T
where # is on of the following:
0 no offset
1 offset output
More The control panel setting determines how the printer offsets the
output. The following settings are available:
• On Job—Jobs are offset only.
• On Job and Copy (default)—All print jobs and sets of
individual copies are offset in the output trays.
• Disable—The output is not offset unless a Job Separation
command is received requesting an offset output.
Refer to the Xerox MRP Family 4220/MRP, 4230/MRP System
Administrator Guide for more information on offset.
2-2 XEROX MRP FAMILY PCL 5 AND POSTSCRIPT PRINTER LANGUAGE REFERENCE