Printer User Manual

POSTSCRIPT MODE
Line edge enhancement Specified by the PostRenderingEnhance and
PostRenderingEnhanceDetails parameters. The image
enhancement options and the control panel mapping are shown
in table 1-3.
Table 1-3. Mapping of PostRenderingEnhanceDetails to
control panel selection
Key Value Function Control panel display
Revalue 0 LEE off Disable
1 LEE light Light
2 LEE medium Medium (default)
3 LEE dark Dark
Type 10 Constant N/A
Outputfaceup stacking Each output tray accommodates only one method of stacking.
Pages are always stacked face up on the face-up tray and face
down on the top tray and the high-capacity stacker. The
outputfaceup values should correspond to the current output
tray (true for output to the face up tray, and false for output to
the top tray and high-capacity feeder).
Paper offset Specified by the Jog parameter, as shown in table 1-4.
Table 1-4. Mapping of Jog to the printer offset control
panel functions
Integer Function Control panel display
0 Do not jog Disable
1 Jog at device
deactivation
Other setting from host is
active
2 Jog at end of job On job
3 (default) Jog after each set On job and copy
The value of Jog in the page device dictionary is ignored for the
face-up tray. Paper cannot be physically shifted at this output
location.
Multiple copies Specified by the NumCopies parameter. Multiple copies are
delivered uncollated.
XEROX MRP FAMILY PCL 5 AND POSTSCRIPT PRINTER LANGUAGE REFERENCE 1–7