Operation Manual

Xerox
®
Duplex Travel Scanner Maintenance
32 User Guide
To open the scanner hardware properties page:
• Windows 7 and later—from the Windows Control Panel, open Hardware and Sound and
then Devices and Printers. Right-click on the scanner and then select Scan properties from
the list.
• Windows Vista—from the Windows Control Panel, open Hardware and Sound and then
Scanners and Cameras. Click on the scanner icon then click on the Properties button.
• Windows XP—from the Windows Control Panel when in category view, open Printers and
Other Hardware and then Scanners and Cameras. Right-click on the scanner and then
select Properties from the list.
Device Settings
The Device Settings tab shows the hardware information for your scanner. The options on the
Device Settings tab will be available based on whether or not the scanner hardware supports the
feature. Please disregard any information about features that you do not see in the interface for
your scanner.
Scanner Details
• Firmware version—this is the scanner’s hardware processor version number.
• Serial number—the scanner’s unique identification number.
• LLD version—the scanner’s base driver version. This is not the OneTouch software revision,
TWAIN or WIA driver versions.
• Driver version—this is the version of the scanner’s TWAIN driver.
Scanner Settings
• Calibrate—the scanner needs to be calibrated as part of your monthly maintenance of the
scanner. You will need the calibration page provided with the scanner. Click the Calibrate
button to start the utility. Follow the instructions on-screen to calibrate the scanner.