Operation Manual

Installation Xerox
®
Duplex Travel Scanner
User Guide 15
Connect the USB Cable
The scanner does not have an external power supply. It draws its power directly from the
computer through the USB cable. If you use a USB hub with your computer, the hub must have its
own power supply. The scanner is ready to scan as soon as its software is finished loading onto
your computer.
1. Remove any tape from the USB cable.
2. Plug the USB cable into the USB port on the scanner then into a USB port on the computer.
Check your computer’s manual for USB port locations.
If the plug does not attach easily, make sure that you are plugging it in correctly. Do not force
the plug into either connection.
The status light comes on and flashes indicating that the scanner is receiving power.
Your computer recognizes that a scanner has been plugged into the USB port and
automatically loads the appropriate software to run the scanner.
3. When you’re certain that the software has completely loaded, return to the “Complete the
installation by connecting your hardware” window.