Printer User Manual

Operator Guide Paper and other stock
DocuTech 65/DocuPrint 65 3-9
The printer performance for new and recycled 8.5 x 11 inches (216 to 279
mm) or A4 paper for various weights is shown in Table 3-5.
Recommendations for loading special stock
The common uses and the special requirements for the variety of stock types
that the printer can accommodate are shown in Table 3-6.
Table 3-5. Printer performance for new and recycled plain paper
Paper Weight
Throughput Material 8.5 x 11 in. or A4 Rating Note
Less than 16 lb or 61 gsm x
Between 16-20 lb or 61-75 gsm o
Between 20-32 lb or 75-120 gsm l
Between 32-110 (index) lb or 120-203 gsm ol
Greater than 110 (index) lb or 203 gsm x
Table 3-6. Recommendations for loading special stock
Stock Type Common Use Recommendation
Hole-punched
3 or 4 holes
Ringed binders Use long-edge feed paper for
best imaging speed.
Load with holes on the left in
Trays 5-6.
Load with holes on the right in
Trays 1-4.
Perforated Pages for partial
removal, such as
order forms and
receipts
Where possible, load with the
perforations parallel to the
feed direction.
Pre-printed and
letterhead
Common
correspondence,
mailings and
advertising
materials
Use ultra-violet cured or
oxidative inks to extend the life
of the Feed Roll Cartridges.
Load face up in Trays 1-4.
Load face down in Trays 5-6.