Printer User Manual

Operator Guide Safety notes
DocuTech 65/DocuPrint 65 xiii
Electrical safety
Attention to the following requirements ensures the safe operation of your
equipment.
Printer
USA/Canada The printer requires a 115V AC outlet, dedicated 20 Amp, 3-wire circuit.
Europe The printer requires a 220-240V outlet, dedicated 13 Amp or 10 Amp circuit.
The equipment must be connected to a grounded mains outlet.
CAUTION
Ensure that the power connection for your printer satisfies these
requirements.
• The power receptacle for the printer must meet the requirements stated
on the data plate on the rear of the printer.
• The socket outlet shall be installed near the equipment within reach of the
10 ft. (3 m) cable and shall be easily accessible.
• Use the power cable that is supplied with your printer and controller. Do
not use an extension cord, or remove or modify the power cord plug.
• Plug the power cable directly into a correctly grounded electrical outlet. If
you are not sure whether or not an outlet is correctly grounded, consult a
qualified electrician.
• Do not use an adapter to connect the printer to an electrical outlet that
lacks a ground connection terminal.
• The power cord is the disconnect device for this printer.
• Do not override or disable electrical or mechanical interlocks.
• Do not push objects into slots or openings on the printer. Electrical shock
or fire may result.
• Do not obstruct ventilation openings. These openings prevent
overheating of the printer.