Laser Printing Systems System Generation Guide

SYSGEN AND SYSGEN-RELATED PROCEDURES
XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE 4-25
11. Key in B (boot) and press <ENTER>. The OSS loads onto the system disk.
The messages window displays:
CPU Test Complete
Imaging Devices Present
Memory test in progress
Memory test complete
Loading Start-Up Task
XEROX DocuPrint 180
Laser Printing System
Version Revision
Disk ID = xxxx
The date window displays.
12. PC UI:
Enter the month (MM), day (DD), and year
(YY) in the appropriate boxes of the date
window (use the <TAB> key to advance
from box to box) and select the Apply/Close
header button.
Enter the hour (HH), minute (MM), and
second (SS) in the appropriate boxes of the
time window (use the <TAB> key to
advance from box to box) and select the
Apply/Close header button.
Terminal:
Enter the date and time. Entry of the
seconds (ss) is optional.
Enter Y or N to indicate whether time and
date are correct.
The time window displays.
mm/dd/yy hh:mm:ss
ARE THE DATE AND TIME CORRECT AS
DISPLAYED (Y/N)?
13. The system displays:
**Applying sysgen patches**
The following patches may be selected by
PATCH-ID:
PATCH-ID INVOKES
-------- -------
MER001 Patch to allow Mergenthaler
fonts only.
Enter patch ID’s or press ENTER:
Table 4-5. Steps to perform an online update sysgen
Step Action System Response