Laser Printing Systems System Generation Guide

SYSGEN AND SYSGEN-RELATED PROCEDURES
XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE 4-23
5. Enter N to retain the existing ID or Y to
enter a new system ID and press
<ENTER>.
Do you want to save the accounting file?
enter 'y' or ’n'
6. Enter Y or N and press <ENTER>. The base configuration and the system configuration
options are displayed followed by:
Do you wish to make any changes?
Enter 'y' or 'n'
>
7. Enter Y or N and <ENTER>. A Y and
<ENTER> response causes the change
menu to display. Each time a change is
made, the change question is asked until
an N and <ENTER> is entered, and the
sysgen program continues.’
To discard the changes you just made and
continue sysgen, enter Y.
To save the changes you just made and
continue sysgen, enter N.
Do you want to discard the changes you just
made? Enter 'y' or 'n' >
Is continuation of sysgen required? (y or n)
8. Enter Y and <ENTER>. Should sysgen read from host or tape?
'h' or 't'
Table 4-5. Steps to perform an online update sysgen
Step Action System Response