Laser Printing Systems System Generation Guide

SAMPLE SYSTEM CONFIGURATIONS
3-6 XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE
11) Paper size Displays the paper size menu.
Select paper size
Size Inches Millimeters
1) US Letter 8.5 x 11.0 216 x 279
2) US Legal 8.5 x 14 216 x 356
3) A3 16.54 x 11.69 420 x 297
4) A4 8.27 x 11.69 210 x 297
5) B4 10.12 x 14.33 257 x 364
6) B5 7.17 x 10.12 182 x 257
7) User Selectable Size
12) XPAF (if installed) Selecting this option adds XPAF; selecting it again removes it.
13) Raster image
processor (if installed)
This option is not supported on the DocuPrint 180 LPS. Selection of option
13 has no effect on the LPS
Displays the following question:
DOES THIS SYSTEM HAVE A RASTER IMAGE PROCESSOR? ENTER
’Y’ OR ’N’
If you enter N, all raster image processor (RIP) devices are removed from
the system.
If you enter Y, the following message is displayed:
TYPE THE RIP UNIT NUMBERS (0-3)
ENTER OPTIONS
Enter the appropriate numbers. If found, they are added to the system. If
RIP is not found, the following message is displayed:
RIP x IS NOT IN THE SYSTEM (PLEASE CONFIRM)
ENTER ’Y’ OR ’N’
14) Terminal type Selecting this option changes the terminal to a PC type; selecting it again
changes it to a character type. Note: The character type terminal is not
supported.
15) Tape device table Selecting this option allows you to alter the tape device assignment table.
16) Default printing order Selecting this option displays the following suboptions:
1) 1 - N
2) N - 1
Enter option 1 for first-to-last page (facedown) output; or option 2 for last-
to-first page (faceup) output.
You may select either 1TON or NTO1 as the system default.
When the system default is 1TON, NTO1 is processed only if it is invoked
in the JDE or JDL. The system ignores NTO1 in DJDE-selected job
descriptor entries (JDEs) or job descriptor libraries (JDLs).
When the system default is NTO1, the system assumes each report is
NTO1 until the first data page, even if 1TON is specified in the JDE or JDL.
This arrangement allows you to use DJDE-selected JDEs and JDLs that
invoke NTO1 after a series of banner pages.
Table 3-4. Sample configurations (continued)
Option Description