All in One Printer User Manual

Advanced Features and Troubleshooting Manual 29
Control Panel Menus
AppSocket PDL Sets the default Print Description Language emulation for the Token Ring
AppSocket interface.
Values:
Auto (default)
PCL
PostScript
AppSocket Bin PS Sets the AppSocket binary mode of PostScript.
Values:
On
Off (default)
TTalk Enable Sets the Token Ring TokenTalk protocol.
Values:
On (default)
Off
HTTP Enable Sets the Token Ring HTTP Server protocol.
Values:
On (default)
Off
Auto IP Address Enables/disables the generation of an IP address by the printer if the DHCP
server does not respond with an IP address.
Values:
On (default)
Off
IP Address Res Sets the method used to resolve (assign) the IP address, including Sub Net
Mask and Default Gateway.
Values:
Static
BOOTP/RARP
DHCP
(default)
IP Address Sets the four byte IP address. (This menu item only appears if
IP Address
Res
is set to static.)
Values:
xxx.xxx.xxx.xxx
where xxx = 000 to 255
Note: Once the control panel shows
Sub Net Mask on the top line, use the
Value keys (labeled 3 or 7) to scroll to the desired value at the cursor
location. To move the cursor, use the Item keys (labeled 2 or 6). Thus, you
can change characters within the address rather than having to re-enter the
entire address.
Sub Net Mask Sets the four byte Sub Net Mask address. (This menu item only appears if
IP
Address Res is set to static.)
Values:
xxx.xxx.xxx.xxx
where xxx = 000 to 255
Note: Once the control panel shows
Sub Net Mask on the top line, use the
Value keys (labeled 3 or 7) to scroll to the desired value at the cursor
location. To move the cursor, use the Item keys (labeled 2 or 6). Thus, you
can change characters within the address rather than having to re-enter the
entire address.
Token Ring Menu Items (cont'd.)