Printer User Manual
Table Of Contents
- System Administrator Guide
- Contents
- Safety Notes
- Configuring the Printer
- Managing Printer Usage
- Using the Hard Drive and Flash Memory
- Maintaining the Printer
- Troubleshooting
- Installing Printer Options
- Index
Using the Menu System
1-30 ❖ System Administrator Guide
Letterhead
Set the fuser temperature to be
associated with the paper type of
Letterhead
.
The available values are:
Normal*
High
Low
This item appears only when the
Config Fuser item is set to
On
.
1. Press
Menu Up
or
Menu Down
until you see:
Menus
Tray Menu
2. Press
Item Up
or
Item Down
until
you see:
Tray Menu
Letterhead
3. Press
Value Up
or
Value Down
until
you see:
Letterhead =
New Value
4. Press
Enter
. You will see:
Tray Menu
Letterhead
5. Press
Online
. You will see:
Ready
Prepunched
Set the fuser temperature to be
associated with the paper type of
Prepunched
.
The available values are:
Normal*
High
Low
This item appears only when the
Config Fuser item is set to
On
.
1. Press
Menu Up
or
Menu Down
until you see:
Menus
Tray Menu
2. Press
Item Up
or
Item Down
until
you see:
Tray Menu
Prepunched
3. Press
Value Up
or
Value Down
until
you see:
Prepunched =
New Value
4. Press
Enter
. You will see:
Tray Menu
Prepunched
5. Press
Online
. You will see:
Ready
Table 1.11 Tray Menu Functions
(continued)
Menu Item and Function Keystrokes Display Reads
Table1.11 Page7 of 10