Printer User Manual
Table Of Contents
- System Administrator Guide
- Contents
- Safety Notes
- Configuring the Printer
- Managing Printer Usage
- Using the Hard Drive and Flash Memory
- Maintaining the Printer
- Troubleshooting
- Installing Printer Options
- Index
Additional Memory
6-52 ❖ System Administrator Guide
Additional Memory
Installing or
Removing
1
Power off the printer and disconnect the power cord from
the power outlet and the printer.
Installing or removing the additional memory
while the printer is powered on may cause a
malfunction.
2
Open the rear cover.
Be careful not to touch the fuser. It becomes
very hot from printing.
3
Remove the side cover by (1) pressing in, (2) sliding,
(3) pulling it out from the bottom and (4) down.
240V
120V
2
1
3
4