Printer User Manual
Table Of Contents
- System Administrator Guide
- Contents
- Safety Notes
- Configuring the Printer
- Managing Printer Usage
- Using the Hard Drive and Flash Memory
- Maintaining the Printer
- Troubleshooting
- Installing Printer Options
- Index
Maintenance Kit Instructions
Chapter 4: Maintaining the Printer ❖ 4-7
Replacing the Bias
Transfer Roller
The bias transfer roller is used for transferring toner onto
paper. To replace the bias transfer roller with a new one,
follow the steps listed below.
To avoid electric shock, be sure to power off and
unplug the printer before beginning this procedure.
1
Power off the printer and disconnect the power cord.
2
Open the top cover.
3
Lift out the laser print cartridge.
To prevent toner stains, place the cartridge on a
surface covered with old scrap paper or the like.
240V
120V