Printer User Manual

Using the Menu System
Chapter 1: Configuring the Printer ❖ 1-67
LPR PDL
Set the default Page Description
Language emulation for the Ethernet
LPR protocol.
The available values are:
Auto*
PCL
PostScript
When set to
Auto
, the printer will
sense the PDL for each job and
automatically set the PDL accordingly.
1. Press
Menu Up
or
Menu
Down
until you see:
Menus
Ethernet Menu
2. Press
Item Up
or
Item Down
until you see:
Ethernet Menu
LPR PDL
3. Press
Value Up
or
Value Down
until you see:
LPR PDL =
New Value
4. Press
Enter
. You will see:
Ethernet Menu
LPR PDL
5. Press
Online
. You will see:
Ready
LPR Binary PS
Enable or disable the LPR binary mode
of PostScript.
The available values are:
On
Off*
1. Press
Menu Up
or
Menu
Down
until you see:
Menus
Ethernet Menu
2. Press
Item Up
or
Item Down
until you see:
Ethernet Menu
LPR Binary PS
3. Press
Value Up
or
Value Down
until you see:
LPR Binary PS =
New Value
4. Press
Enter
. You will see:
Ethernet Menu
LPR Binary PS
5. Press
Online
. You will see:
Ready
Table 1.23 Ethernet Menu Functions
(continued)
Menu Item and Function Keystrokes Display
Table1.23 Page2 of 12