Printer User Manual

Using the Menu System
1-36 ❖ System Administrator Guide
Point Size
Set the point size when the font
selected is a scaleable proportional
font. Point size is measured in parts
per 72 of an inch.
The available values are:
4.00 - 999.75 (
12.00*
)
The point size changes incrementally
by .25 each time either
Value Up
or
Value Down
is pressed. Holding
down
Value Up
or
Value Down
causes continuous scrolling through
the point sizes.
1. Press
Menu Up
or
Menu
Down
until you see:
Menus
PCL Menu
2. Press
Item Up
or
Item Down
until you see:
PCL Menu
Point Size
3. Press
Value Up
or
Value Down
until you see:
Point Size =
New Value
4. Press
Enter
. You will see:
PCL Menu
Point Size
5. Press
Online
. You will see:
Ready
Table 1.13 PCL Menu Functions
(continued)
Menu Item and Function Keystrokes Display Reads
Table1.13 Page2 of 6