Printer User Manual

Using the Menu System
1-28 ❖ System Administrator Guide
Tray
N
Mode
Determine whether or not to use
Tray N’s auto size detection
mechanism or Custom Size
settings. The available values are:
Auto*
Custom
1. Press
Menu Up
or
Menu Down
until you see:
Menus
Tray Menu
2. Press
Item Up
or
Item Down
until
you see:
Tray Menu
Tray
N Mode
3. Press
Value Up
or
Value Down
until
you see:
Tray N Mode =
New Value
4. Press
Enter
. You will see:
Tray Menu
Tray
N Mode
5. Press
On Line
. You will see:
Ready
Config Fuser
Enable the setting of fuser
temperatures associated with
each paper type (otherwise set
automatically by the printer).
The available values are:
On
Off*
When set to
On
, paper types are
available as menu items (see the
following items in this table).
1. Press
Menu Up
or
Menu Down
until you see:
Menus
Tray Menu
2. Press
Item Up
or
Item Down
until
you see:
Tray Menu
Config Fuser
3. Press
Value Up
or
Value Down
until
you see:
Config Fuser =
New Value
4. Press
Enter
. You will see:
Tray Menu
Config Fuser
5. Press
Online
. You will see:
Ready
Table 1.11 Tray Menu Functions
(continued)
Menu Item and Function Keystrokes Display Reads
Table1.11 Page5 of 10