Printer User Manual

Using the Menu System
1-26 ❖ System Administrator Guide
Tray Sequence
Set the sequence of trays used by
the printer when tray switching is
required. The available values are:
MBF-1 1-MBF
MBF-2 1-2
MBF-3 1-2-3
MBF-1-2 2-1
MBF-1-2-3 2-3
MBF-2-1 3-1
MBF-2-3 3-1-2
MBF-3-1 Off
MBF-3-1-2
Values in italics are available only with
optional tray(s) installed.
The first tray of a sequence is
used until it runs out of paper, at
which time the next tray in the
sequence is used (if it has the
correct paper size and type).
See the section
“Configuring
Automatic Tray Switching”
(page 1-112) for rules and
examples of usage.
1. Press
Menu Up
or
Menu Down
until you see:
Menus
Tray Menu
2. Press
Item Up
or
Item Down
until
you see:
Tray Menu
Tray Sequence
3. Press
Value Up
or
Value Down
until
you see:
Tray Sequence =
New Value
4. Press
Enter
. You will see:
Tray Menu
Tray Sequence
5. Press
On Line
. You will see:
Ready
Table 1.11 Tray Menu Functions
(continued)
Menu Item and Function Keystrokes Display Reads
Table1.11 Page3 of 10