Printer User Manual

Using the Menu System
Chapter 1: Configuring the Printer ❖ 1-25
MBF Type
Set the type of paper that is loaded
in the multi bypass feeder (MBF).
The available values are:
Plain*
Color
Preprinted Cardstock
Letterhead User Type 1 (if loaded)
Transparency User Type 2 (if loaded)
Prepunched User Type 3 (if loaded)
Labels User Type 4 (if loaded)
Bond User Type 5 (if loaded)
Recycled
1. Press
Menu Up
or
Menu Down
until you see:
Menus
Tray Menu
2. Press
Item Up
or
Item Down
until
you see:
Tray Menu
MBF Type
3. Press
Value Up
or
Value Down
until
you see:
MBF Type =
New Value
4. Press
Enter
. You will see:
Tray Menu
MBF Type
5. Press
On Line
. You will see:
Ready
Tray
n
Type
Set the type of paper that is loaded
in Tray n (where n is the tray
number—1,2, or 3). The available
values are:
Plain*
Color
Preprinted Cardstock
Letterhead User Type 1 (if loaded)
Transparency User Type 2 (if loaded)
Prepunched User Type 3 (if loaded)
Labels User Type 4 (if loaded)
Bond User Type 5 (if loaded)
Recycled
1. Press
Menu Up
or
Menu Down
until you see:
Menus
Tray Menu
2. Press
Item Up
or
Item Down
until
you see:
Tray Menu
Tray 1 Type
3. Press
Value Up
or
Value Down
until
you see:
Tray 1 Type =
New Value
4. Press
Enter
. You will see:
Tray Menu
Tray 1 Type
5. Press
On Line
. You will see:
Ready
Table 1.11 Tray Menu Functions
(continued)
Menu Item and Function Keystrokes Display Reads
Table1.11 Page2 of 10