Printer User Manual
Table Of Contents
- System Administrator Guide
- Contents
- Safety Notes
- Configuring the Printer
- Managing Printer Usage
- Using the Hard Drive and Flash Memory
- Maintaining the Printer
- Troubleshooting
- Installing Printer Options
- Index
Hard Disk Drive
6-38 ❖ System Administrator Guide
4
Loosen the two screws that secure the controller board’s
access cover.
5
Remove the access cover by (1) pulling it out at the
bottom, (2) lifting it up slightly, then (3) pulling it away at
the top.
6
Align the drive with the four support posts and connector.
7
Push in on the drive until all four corners latch into place.
2
1
3