Printer User Manual

Using the Menu System
Chapter 1: Configuring the Printer ❖ 1-111
Disk Initialize
Initialize the Hard Disk Drive. The
available values are:
Yes
No*
This function is ignored if the disk is
locked (write protected) via a PJL or
SNMP command.
1. Press
Menu Up
or
Menu
Down
until you see:
Menus
Reset Menu
2. Press
Item Up
or
Item Down
until you see:
Reset Menu
Init Disk
3. Press
Value Up
or
Value Down
until you see:
Init Disk =
Yes
4. Press
Enter
. You will see:
Reset Menu
Init Disk
5. Press
Online
. You will see:
Ready
Disk Format
Format the Hard Disk Drive. The
available values are:
Yes
No*
This function is ignored if the disk is
locked (write protected) via a PJL or
SNMP command.
1. Press
Menu Up
or
Menu
Down
until you see:
Menus
Reset Menu
2. Press
Item Up
or
Item Down
until you see:
Reset Menu
Disk Format
3. Press
Value Up
or
Value Down
until you see:
Disk Format =
Yes
4. Press
Enter
. You will see:
Disk Format
Please Wait ...
5. When the formatting is
complete, you will see:
Ready
Flash Format
Format flash memory. The available
values are:
Yes
No*
1. Press
Menu Up
or
Menu
Down
until you see:
Menus
Reset Menu
2. Press
Item Up
or
Item Down
until you see:
Reset Menu
Flash Format
3. Press
Value Up
or
Value Down
until you see:
Flash Format =
Yes
4. Press
Enter
. You will see:
Flash Format
Please Wait ...
5. When the formatting is
complete, you will see:
Ready
Table 1.31 Reset Menu Functions
(continued)
Menu Item and Function Keystrokes Display
Table1.31 Page3 of 3