Laser Printing System Message Guide

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-19
OS1235 CLP Commands not allowed while printing
A CLP command was entered. CLP commands may not be used
while the printer is active.
Action None.
OS1240 Status command inoperative
The <JOBS STATUS> key was pressed or the JOBS command was
entered. The system is unable to display status because a file was
not created at sysgen due to insufficient disk space.
Action 1. Delete files to create more space.
2. Compress disk.
3. Enter the SFS CREATE command to create a status file. (Refer
to your
DocuPrint 96/DocuPrint 96MX LPS Operations
Reference
chapter on system and report accounting, including
status file information, for details.)
OS1245 STAFIL.SYS Initialization failure status inoperative
The SFS CREATE command was entered. The system is unable to
process the command because the file was not created at sysgen
due to insufficient disk space.
Action 1. Delete some files to create more space.
2. Compress disk.
3. Enter the SFS CREATE command to create a status file. (Refer
to your
DocuPrint 96/DocuPrint 96MX LPS Operations
Reference
chapter on tracking system activity for additional
information.)
OS1250 Accounting enabled
A disabled accounting function has been reinstated.
Action None.
OS1255 Accounting disabled
The accounting function is restricted. The system will not process the
ACCOUNT or REPORT command that has been entered.
Action Obtain the correct password and log on at the correct level. (Refer to
your
DocuPrint 96/DocuPrint 96MX LPS Operations Reference
chapter on setting LPS parameters for additional information.)
OS1261 Paper size out of range
The paper size specified in the JSL is not supported by the IOT.
Action Contact your systems specialist.