Laser Printing System Message Guide

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-17
OS1136 Sheet rotation: ‘0’ = None or ‘1’ = Rotate sheet:
This is one of a series of FEX questions about the test print job, which
also includes messages OS2922, OS2923, OS2924, and OS2008.
Action Enter 0.
OS1137 Rotation will be set to x.
This message verifies that you have selected either rotation (‘1’) or
non-rotation (‘0’) of sheets for your FEX test print job.
Action None.
OS1150 Job queue full
Print queue cannot hold any more data.
Action Print or delete jobs in queue before more jobs are sent.
OS1155 Request rejected, diagnostic job already in progress
A diagnostic print job is already being processed; additional requests
are rejected.
Action None.
OS1160 No pages waiting to be drained
The DRAIN command was entered. No complete pages remain in
the print file or memory.
Action None.
OS1170 Invalid command while offline
An online only command was entered while the system is offline.
Action Place the system online to perform the desired function. (Refer to the
online chapter in your
DocuPrint 96/DocuPrint 96MX LPS Operator
Guide
.
OS1175 Command not allowed while **** is active
The command entered cannot be processed while the indicated task
is in progress.
Action 1. Exit indicated task. (Refer to appropriate section of your
DocuPrint 96/DocuPrint 96MX LPS Operations Reference for
instructions.)
2. Reenter the command.
OS1180 Invalid response
Response to a prompt was incorrectly entered.
Action Reenter response, ensuring accuracy and the correct number of
characters.