Laser Printing System Message Guide

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-15
OS1096 Activity report ending
Processing of the Activity Report has completed. No action.
Action None.
OS1097 User report ending
Processing of the User Report has completed. No action.
Action None.
OS1101 FCG working.
FCG tasks are in progress.
Action None.
OS1102 Finishing Exerciser is reconnecting to the IOT.
After completing the test print job, FEX is reconnecting
communications with the printer and restoring the previous finishing
parameters information.
Action None.
OS1103 FEX: Error, problem while restoring IOT Memory.
A serious error has occurred when FEX attempted to communicate
with the printer.
Action Restart FEX.
OS1104 Failed to connect to the IOT. Exiting.
FEX could not establish communications with the printer, because a
job is printing.
Action Restart FEX when the DocuPrint 96/DocuPrint 96MX LPS is not
actively printing a job.
OS1105 No valid machine serial number received. Task exiting
The printer serial number was not found when the system attempted
to produce a billing report.
Action If authorized to do so, resysgen the system, entering the serial
number (located on a panel inside the printer) when instructions on
the display ask for it. (Refer to
DocuPrint 96/DocuPrint 96MX LPS
System Generation Guide
, or contact your systems specialist.)