Laser Printing System Message Guide

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-7
OS0853 Mode: xxx housing, -plex
During PQA, this message identifies the housings being adjusted
and whether simplex or duplex printing is specified for the current
PQA operation. This message may accompany other related
messages.
Action None.
OS0854 After Print Quality
Adjustment: continue printing
automatically
This message specifies that when print quality adjustment is
completed, printing of the job will continue automatically.
Action None.
OS0855 After Print Quality
Adjustment: stop before
printing
This message specifies that when print quality adjustment is
completed, printing will not continue automatically.
Action None.
OS0856 Print Quality Adjustment request has been canceled
Your PQA CANCEL command request has been processed and print
quality adjustment has been canceled.
Action None.
OS0860 Substituting color for color for this report
After you enter a SUBSTITUTE INK command, this message tells
you which primary color is being substituted for another primary color
in this report.
Action None.
Note: The current settings are always displayed whenever a valid
SUBSTITUTE INK command is entered or following a successful
print quality adjustment. In addition, the current SUBSTITUTE INK
command settings are displayed at the time the output task is loaded
into memory. The exact wording of messages OS0860 through
OS0875 depends upon the parameters you specify in your
SUBSTITUTE INK command.
OS0861 Substituting color for all colors for this report
After you enter a SUBSTITUTE INK command, this message tells
you the primary color which is being substituted for all non-black
primary colors in your report.
Action None.