Laser Printing System Message Guide

XERPX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-1
6. 6OSS (operating system
software) messages
The OS messages appearing on your system controller display are
generated by the operating system software (OSS). These
messages are assigned to levels 0 through 9. The higher the
number, the more serious the problem or condition being reported.
The first digit after “OS” indicates the message level. For example,
OS7210 is a Level 7 message. Your
DocuPrint 96/DocuPrint 96MX
LPS Operator Guide
and DocuPrint 96/DocuPrint 96MX LPS
Operations Reference
provide detailed information about LPS
operations and related messages.
OS Level 0: Confirmation
Confirms that the DocuPrint 96/DocuPrint 96MX LPS is responding.
OS0010 Resuming input
The CONTINUE or CONTINUE I command was entered, or the
<CON> key was pressed. System is reading data onto the system
disk.
Action None.
OS0020 Resuming output
The CONTINUE or CONTINUE O command was entered, or the
<CON> key was pressed. The system is printing data from the
system disk.
Action None.
OS0030 System is “ONLINE”
The ONLINE command was entered. The system is ready to receive
data through a host channel.
Action None.
OS0040 System is “OFFLINE”
The OFFLINE command was entered. The system is not connected
to a host channel and is not able to receive data from a host.
Action None.