Laser Printing System Message Guide

IFU (INTERPRESS FONT UTILITY) MESSAGES
5-34 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
F8210 Error: from IPF_read_block ( ) entry ( )
An error occurred when the system attempted to access the
IPFNTS.SYS file. Either the file is not on the system or is corrupted,
or there is a software problem.
Action 1. Check if the IPFNTS.SYS file is on the system.
2. If IPFNTS.SYS is on the system, it is corrupted and should be
deleted.
3. Retry the command.
4. If the problem continues, contact your systems specialist or
Xerox Customer Service.
IF8211 Error: from IPF_WRITE_BLOCK ( ) ENTRY ( )
An error occurred when the system attempted to access the
IPFNTS.SYS file. Either the file is not on the system or is corrupted,
or there is a software problem.
Action 1. Check if the IPFNTS.SYS file is on the system.
2. If IPFNTS.SYS is on the system, it is corrupted and should be
deleted.
3. Retry the command.
4. If the problem continues, contact your systems specialist or
Xerox Customer Service.
IF8212 Error: from FFM_FIND_NEXT ( )
An error occurred when the system attempted to access the
IFUFFM.SYS file. Either the file is not on the system or is corrupted,
or there is a software problem.
Action 1. Check if the IFUFFM.SYS file is on the system.
2. If IFUFFM.SYS is on the system, it is corrupted and should be
deleted.
3. Retry the ADD command.
4. If the problem continues, contact your systems specialist or
Xerox Customer Service.
IF8213 Error: from FFM_READ_CURRENT ( )
An error occurred when the system attempted to access the
IFUFFM.SYS file. Either the file is not on the system or is corrupted,
or there is a software problem
Action 1. Check if the IFUFFM.SYS file is on the system.
2. If IFUFFM.SYS is on the system, it is corrupted and should be
deleted.
3. Retry the ADD command.
4. If the problem continues, contact your systems specialist or
Xerox Customer Service.