Laser Printing System Message Guide

IFU (INTERPRESS FONT UTILITY) MESSAGES
5-26 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
IF7000 ** - WRITE LOCK PROTECTION ERROR - **
A write operation could not be completed successfully, probably
because the write ring is not present on the magnetic tape.
Action 1. Put a write enable ring on the magnetic tape. (Refer to your
DocuPrint 96/DocuPrint 96MX LPS Operator Guide .)
2. Retry the command.
IF7100 Can‘t find IFUFSN.SYS; resysgen and retry ADD
The IFUFSN.SYS file, which contains default font information, was
not found on the system disk. (Refer to your
DocuPrint 96/
DocuPrint 96MX LPS System Generation Guide
.)
Action 1. If authorized to do so, resysgen.
2. Retry the ADD command.
IF7101 Font file x will not open
The requested font file is not on the system.
Action Copy the missing font onto the system.
IF7102 IPFNTS.SYS file will not open
The IPFNTS.SYS file is not on the system.
Action Create a new IFU IPFNTS.SYS file by executing the IFU IPFNTS
command.
IF7104 IPFNTS.SYS open error
The system is unable to access the IPFNTS.SYS file.
Action Create a new IFU IPFNTS.SYS file by executing the IFU IPFNTS
command.
IF7105 Output file will not open
The medium specified (tape, disk, etc.) does not contain the external
file requested
Action Verify the file name and, if it exists on the medium, reenter the
command. (Refer to your
DocuPrint 96/DocuPrint 96MX LPS
Operations Reference
chapter on managing LPS resources for
additional information.)
IF7106 Print file will not open
The IFU LIST command cannot open the .DAT print file to process.
This is probably a disk error.
Action 1. Compress the disk and retry the command.
2. If the problem continues, contact your systems specialist or
Xerox Customer Support.