Laser Printing System Message Guide

IFU (INTERPRESS FONT UTILITY) MESSAGES
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 5-25
IF4111 FIS processing error; aborting ADD
Due to an error in the FIS master, the ADD command is being
aborted. This error is probably the result of a previous error which
should have displayed a message.
Action Contact your systems specialist or Xerox Customer Service.
IF4112 Unable to create a font file, x; aborting ADD.
An error has occurred when the system attempted to access the font
file. The ADD command has been aborted.
Action None.
IF4120 Easy values are invalid. fatal error in Interpress
A fatal Interpress error occurred while an FIS master was being
processed. The Interpress error appears on the system controller
display before this IFU message.
Action 1. Correct the FIS master.
2. Reenter the ADD command.
IF4121 Easy values are invalid. fatal error in FIS master.
An error occurred during processing of an FIS master.
Action 1. Correct the FIS master.
2. Reenter the ADD command.
IF4122 Character is missing at least one extent.
The FIS master lacks sufficient information to complete the ADD
process for this character.
Action 1. Correct the FIS master.
2. Reenter the ADD command.
IF4123 Substitute character bitmap is bad or missing.
During processing of the FIS master, the substitute character’s raster
bitmap was found to be either missing or defective.
Action None.
IF4124 Rendered subcharacter is bad or missing.
One or more subcharacter component(s) of a rendered character is
either defective or not in the FIS master.
Action 1. Correct the FIS master.
2. Reenter the ADD command.