Laser Printing System Message Guide

IFU (INTERPRESS FONT UTILITY) MESSAGES
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 5-11
IF2235 Please confirm deletion of wildcarded Interpress font
Upon entering the IFU DELETE command, you are asked by the
system to confirm this operation by entering C to continue or A to
abort.
Action Enter C or A as appropriate.
IF2236 Response was received unsuccessfully!
The operator’s response was not received correctly.
Action None.
IF2237 Package %0 issued unknown message number %1.
This is a general error message.
Action None.
IF2239 Font x already exists on system, renamed to: y.
During execution of the IFU COPY READ command, the system is
renaming the indicated font before it copies it onto system disk
because a font with the same name already exists on system disk.
Action None.
IF2240 Bad line spacing override value was found in font profile.
The line spacing override value is not a numerical value in the font
profile.
Action 1. Make appropriate changes in the font profile.
2. Retry the ADD command.
IF2241 FISname not in font profile, using name from FIS master.
The FIS-name parameter in the font profile was omitted. The name
from the FIS master will be used to create the font.
Action None.
IF2245 Font or character size exceeds standard format.
The font file bitmap size exceeds 1 Megabit or one or more
characters exceed 1024 bits high by 512 bits wide (if viewed in
portrait orientation).
Action If your system can utilize the 5-word FST format (with version 3
software), set the FTYPE parameter in the font profile to
FTYPE = EXTENDED and retry the ADD process.
or
If your system does not have the 5-word FST format, decrease the
number of characters requested in the CHARS/DCCHARS
parameter in the font profile and retry the ADD process.