Manualshelf

Laser Printing System Message Guide

ManualsBrandsXerox ManualsPrinterDocuPrint 96MX
41424344454647484950
IFU (INTERPRESS FONT UTILITY) MESSAGES
5-10 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
IF2212 The wrong floppy has been mounted
A floppy disk has been mounted out of sequence for reading in. A
message will follow asking if you want to continue or quit this
operation.
Action Mount the correct floppy if you wish to continue.
or
Discontinue the operation.
IF2220 Please enter the next floppy, number x
Mount the floppy disk next in sequence, as indicated in the message.
Action None.
IF2230 Insufficient room on floppy. Please try another floppy.
The floppy disk used does not contain enough space to open a file to
write to during an IFU COPY WRITE command.
Action 1. Insert a different floppy disk.
2. Retry the desired activity.
IF2232 Incomplete Interpress font written; missing font files.
When the Interpress font was written to the medium via the IFU
COPY WRITE command, there were missing font files on the
system. The write will complete successfully, but an IFU COPY
READ of this medium will create incomplete Interpress font data on
the system.
Action 1. Copy the missing font(s) onto the system.
2. Reenter the IFU COPY WRITE command.
IF2233 Incomplete Interpress font read; missing font file(s).
When the Interpress font was written to the medium via the IFU
COPY WRITE command, there were missing font files on the
system. The read will complete successfully, but will not add the
missing font(s) that are mapped to the Interpress font to the system.
Action Copy the missing fonts onto the system. Since the missing fonts are
not indicated, use the IFU FIL/EX command on the Interpress font
read to see which fonts were not read in.
IF2234 Output listings of Interpress fonts may be incomplete.
The output file filled during execution of a “wildcarded” IFU LIST
command and some of the Interpress fonts stored on the system may
not be listed.
Action Retry the operation by entering a number of IFU LIST commands
with specific parameters. This will allow the system to list all
Interpress fonts within each parameter.