Laser Printing System Message Guide

HIP (HOST INTERFACE PROCESSOR) MESSAGES
4-10 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
HP2120 Insufficient disk space for host buffering
Fewer than 256 blocks are available for HIP buffer space. There is
not sufficient space to receive and buffer files. The system cannot go
online.
Action 1. Delete files from system disk to provide more space.
2. Compress the system disk. (Refer to your
DocuPrint 96/
DocuPrint 96MX LPS Operations Reference
chapter on
managing LPS resources for additional information.)
3. Enter the SETUP mode to change the HIP buffer file size.
(Refer to your
DocuPrint 96/DocuPrint 96MX LPS Operations
Reference
chapter on HIP-accessed communicating modes for
additional information.)
HP2121 Insufficient disk space for log print file
You have entered HIP SHOW LOG [PRN]. There is insufficient disk
space for the printing of the log file.
Action Clear additional disk space for printing.
HP2130 Overwrite file name.type: CONFIRM
DUPLICATEFILE = VERIFY was entered in the HIP.CMD file at
installation. A file has been sent having the same name as the file
already existing on system disk.
Action 1. Enter YES if you wish the new file to replace the existing file.
or
2. Enter NO to reject the file transfer.
HP2140 Unable to process jobs list at this time—try again
The HIP START or HIP ABORT command was entered. The printer
is temporarily unable to carry out the requested operation because of
a conflicting ongoing process.
Action Wait one minute, then reenter the HIP START or HIP ABORT
command.
HP2145 Enter ‘HIP show jobs continue’ for more
The HIP JOBS command was entered to display job queue. Queue
contains more than 20 jobs, so all jobs are not shown on the display.
Action Enter the HIP SHOW JOBS CONTINUE command to display the rest
of the job queue entries.
HP2150 HIP job queue full. Enter ‘HIP START.’
or
HIP job queue full. Select or enter ‘HIP START.’
The HIP job queue is full and processing must start in order to free
space for incoming jobs.
Action None.