Laser Printing System Message Guide

DOCUPRINT 96/DOCUPRINT 96MX LPS ADDITIONAL MESSAGES
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 15-31
Cannot use Reserved Words in file names.
The words CON, CLOCK$, AUX, COM(1-4), LPT(1-4), NUL, and
PRN are recognized by the PC User Interface as DOS commands
and therefore cannot be used in file names.
Action Rename any file that has these terms in the file name.
Client-Layer is established
The DocuPrint 96/DocuPrint 96MX LPS is communicating normally.
Action Before printing, check the PC user interface or printer control console
for instructions on clearing any existing faults. If you are instructed to
select CLEAR, you can either select the Clear Faults button on the
PC user interface screen, or enter CLE in the command line
message window.
Command sequence error, FGRP_HEADER not 1st.
The first group of report definitions must define the header; other
records were encountered.
Action If the problem persists, call Xerox Customer Service.
Command sequence error, group not larger than last.
At least one of the report definition groups is out of order.
Action If the problem persists, call Xerox Customer Service.
Command sequence error, number out of range.
Numeric parameter for a report definition command is out of range.
Action If the problem persists, call Xerox Customer Service.
Command sequence error, record number not equal to last +1.
One or more of the report definition commands are out of order.
Action If the problem persists, call Xerox Customer Service.
Communication with the Printer is established
TBD
Action Low-level communication between the system controller and the
printer has been established. The system will now attempt to initialize
Client-Layer communication.