Laser Printing System Message Guide

DOCUPRINT 96/DOCUPRINT 96MX LPS ADDITIONAL MESSAGES
15-22 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
Attempting completion but no completion phase record exists.
Following the end of report printing, the phase manager cannot find
a phase record to manage the completion of the audit log.
Action If the problem persists, call Xerox Customer Service.
Attempting to establish communication with the Printer.
The system has been booted or PSC has been entered, so the
system controller is trying to establish low level communication with
the printer.
Action If the problem persists, call Xerox Customer Service.
Attempting to update too many files within a transaction.
TBD
Action If the problem persists, call Xerox Customer Service.
AUD File Mgr compression buffer too short.
TBD
Action If the problem persists, call Xerox Customer Service.
AUD File Mgr data buffer too short for defined records.
TBD
Action If the problem persists, call Xerox Customer Service.
AUD File Mgr deadlock condition detected.
TBD
Action If the problem persists, call Xerox Customer Service.
AUD File Mgr disk full error.
TBD
Action If the problem persists, call Xerox Customer Service.
AUD File Mgr disk read/write error.
TBD
Action If the problem persists, call Xerox Customer Service.
AUD File Mgr end of file reached.
TBD
Action If the problem persists, call Xerox Customer Service.