Laser Printing System Message Guide

HIP (HOST INTERFACE PROCESSOR) MESSAGES
4-2 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
HP0085 Concatenated job operator display mode is ‘OFF’
In response to an operator command, HIP will not display internal job
status while in a concatenated job mode.
Action None.
HP0090 Job concatenation mode is ‘ON’
In response to an operator command, HIP is now in a concatenated
job mode.
Action None.
HP0095 Job concatenation mode is ‘OFF’
In response to an operator command, HIP is not in a concatenated
job mode.
Action None.
HP0100 Stopped online
The HIP STOP command was entered while the system was online.
Jobs will be accepted until the HIP buffer is full. No further jobs will
be accepted.
Action 1. Wait for message HP2100 to appear on the printer display.
2. Enter the HIP START command to print only jobs in the HIP
buffer.
HP0110 Stopped offline
The HIP STOP command was entered while HIP was offline from the
host. No processes were interrupted.
Action None.
HP0120 Job aborted: JOB ID xxxx
The HIP ABORT job command was entered. The job indicated has
been cancelled.
Action None.
HP0130 Log file reset
You have entered HIP LOG [RESET]. The system is informing you
that the log file has been cleared and all information had been
deleted.
Action None.