Laser Printing System Message Guide

SCALE COMMAND MESSAGES
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 11-5
**More than one white space character not supported**
The requested form consists of a format which cannot be scaled to
600 spi correctly.
Action None
**No dynamic memory**
There is no dynamic memory available.
Action Contact your systems specialist or Xerox Customer Service.
**No input file name specified**
An input file name was not included in the command to invoke
SCALE.
Action Reenter the SCALE command, including the input file name. (Refer
to your
DocuPrint 96/DocuPrint 96MX LPS Operations Reference
chapter on managing LPS resources for additional information.)
**Only one line per TL supported**
A nonstandard FRM file has been used that is not supported by
SCALE.
Action Contact your systems specialist or Xerox Customer Support.
**Restoring previous file, xxxx, due to error(s)**
Due to error(s) already displayed, the previous file is being restored.
Action Verify and reenter the desired command. (Refer to your
DocuPrint 96/DocuPrint 96MX LPS Operations Reference ).