Laser Printing System Message Guide

PSC (PRINTER SUBSYSTEM CONTROLLER COMMAND) MESSAGES
10-2 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
PS9001 CSI download error —CSI not loaded.
The CSI board is not functional.
Action Contact your systems specialist or the Xerox Customer Service.
PS9002 SCSI download failed—executing from ROM.
The firmware downloaded to the SCSI controller failed. The SCSI
controller is executing from a ROM chip.
Action Call your service representative.
PS9003 Wrong SCSI PROM Version—download unsupported.
Firmware download of the SCSI controller cannot take place due to
the presence of an outdated Prom on the SCSI controller. The
problem should be investigated by service.
Action None.
PS9005 Device failed self-test; image integrity uncertain.
The RIP board’s power-on self-test failed. This message indicates
that the integrity and validity of output from this RIP board is
questionable.
Action Contact your systems specialist or Xerox Customer Service.
PS9010 ***FATAL ERROR***No header on RIPOS.SYS File.
The RIP operating system file has an unspecified problem.
Action Contact your systems specialist or Xerox Customer Service.
PS9011 ***FATAL ERROR***Problem with RIPOS.SYS File.
The RIP operating system file has an unspecified problem.
Action Contact your systems specialist or Xerox Customer Service.
PS9012* **FATAL ERROR*** Problem with SCSIOS.SYS File.
There is a problem with SCSIOS.SYS. The data cannot be
downloaded to the SCSI controller.
Action None.
PS9013 ***FATAL ERROR*** No header on SCSIOS.SYS File.
There is a missing or improperly formatted header in SCSIOS.SYS.
The data cannot be downloaded to the SCSI controller.
Action None.