Laser Printing System Message Guide

PG (PURGE COMMAND) MESSAGES
8-2 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
PG0217 Purging HIP Spool File.
The PURGE command is removing unwanted data from the HIP
spool file.
Action None
PG0300 Processing the entire disk except the Print File.
The PURGE F command was entered. The system is clearing all
unused areas of the disk except the print file.
Action None
PG0310 Purging the following disks (excluding print files):
The listed system disk drives will be cleared except for any applicable
print files.
Action None
PG1010 Purge processor active.
A PURGE command was entered while purge was already in
progress. The command is ignored.
Action None
PG1800 Purge processor aborting
The ABORT command was entered. The purge process is being
terminated.
Action None