Laser Printing System Message Guide

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 8-1
8. 8PG (PURGE command)
messages
These messages may appear during process of purging disk or print
file. Refer to your
DocuPrint 96/DocuPrint 96MX LPS Operations
Reference
for detailed information about the PURGE command.
PG0100 Processing the entire disk.
The PURGE D command was entered. The system is clearing all
unused areas of the disk, including the print file.
Action None
PG0110 Purging entirely the following disks:
The listed system disk drives will be purged including any applicable
print files.
Action None
PG0200 Processing the Print File only.
The PURGE P command was entered. The system is clearing the
print file only.
Action None
PG0210 Purging the Print Files.
The PURGE command will remove unwanted data from the print
files.
Action None
PG0215 Purging Print File.
The PURGE command is removing unwanted data from the user’s
print file.
Action None
PG0216 Purging Raster Print File.
The PURGE command is removing unwanted data from the print file
used for rasterization.
Action None