Laser Printing System Message Guide

PDL (JOB SOURCE LIBRARY COMPILATION) MESSAGES
7-4 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
PD7050 Tape record size error.
The record size entered in JSL is incorrect for the tape format.
Action Enter the correct record size
PD7200 PDL internal table overflow.
Not enough dynamic memory remains for JSL. JSL is too large with
too many tables.
Action Take out some of the tables and compile them separately. (Refer to
your
DocuPrint 96/DocuPrint 96MX LPS PDL Reference .)
PD7400 Insufficient available disk space.
Insufficient system disk space remains for the PDL file.
Action 1. Enter the COMPRESS command
2. If the problem continues, delete any unnecessary files.
3. If the problem still continues, enter the COMPRESS command
again. (Refer to your
DocuPrint 96/DocuPrint 96MX LPS
Operations Reference
, chapter 3, "Managing LPS resources,"
table of contents at the beginning of the chapter to locate
additional information.)
PD7500 Print file full.
Output listing work file exceeds space allocation.
Action Reduce the size of JSL.
PD7550 UNEXPECTED FILE OVERFLOW ENCOUNTERED DURING I/O
A large enough file was not created to allow complete transfer from
disk during input or output.
Action 1. Retry compiling JSL. (Refer to your
DocuPrint 96/
DocuPrint 96MX LPS PDL Reference
.
2. If the problem continues, contact your systems specialist or
Xerox Customer Service
.
PD7600 RTEXT File overflow
Routing Text file has too many entries for the allotted system disk
space.
Action Reduce the number of entries
PD8200 and PD8210 Internal error in PDL.
An unspecified software error has occurred. JDL will not compile.
Action 1. Retry compiling JDL
2. If the problem continues, contact your systems specialist or
Xerox Customer Service.