Laser Printing System Message Guide

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-123
OS Level 9: Probable severe hardware error
Warns of probable hardware errors.
OS9050 Unexpected error detected by RIP. Enter:
A RIP error has occurred. You will be prompted to CONTINUE or
ABORT.
Action Enter CONTINUE or ABORT as appropriate.
OS9101 Unable to access; RECTK$SYS.
Either RECTK$SYS does not exist or a read error was detected.
Either condition causes job recovery to fail and the job is aborted.
Action 1. If RECTK$SYS does not exist, DSR restore, sysgen, if
authorized to do so, or contact your systems specialist to
recover RECTK$SYS.
2. If RECTK$SYS does exist:
a. Contact your systems specialist or Xerox Customer Support
to log the bad sector and delete RECTK$SYS.
b. Restore the file via a DSR restore, resysgen, if authorized
to do so, or contact your systems specialist.
c. Resend the job.
OS9102 Unable to access; COREIM.SYS.
Either COREIM.SYS does not exist or a read error was detected.
Either condition causes job recovery to fail and the job is aborted.
Action 1. If COREIM.SYS does not exist, DSR restore, sysgen, if
authorized to do so, or contact your systems specialist to
recover COREIM.SYS.
2. If COREIM.SYS does exist:
a. RNAME COREIM.SYS to some well-known name (e.g.,
BADnnn.TMP).
b. Restore COREIM.SYS via a resysgen, if authorized to do
so, or contact your systems specialist (refer to your
DocuPrint 96/DocuPrint 96MX LPS System Generation
Guide
.)
c. Resend the job.
d. Contact your systems specialist or Xerox Customer Support
to log the bad sector and delete the well-known name.