Laser Printing System Message Guide

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-110 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
OS7210 Input cannot recover —not enough dynamic memory.
Automatic job recovery has been attempted after a software failure
caused a system rollover. The system is unable to recover data
because insufficient dynamic memory remains for the recovery
program. The job is aborted.
Action 1. Restart the job.
2. If the message reappears, contact your systems specialist or
Xerox representative to obtain additional memory capacity.
OS7220 Input unable to initiate recovery.
A software failure has caused a system rollover. The system cannot
begin automatic job recovery because there is not enough dynamic
memory for it. The job is aborted.
Action 1. Restart the job.
2. If the message reappears, contact your systems specialist or
Xerox representative to obtain additional memory capacity.
OS7300 Account form file not found/accounting can‘t print.
The form required to print the accounting page was not found on disk.
The accounting page will not print.
Action 1. Recopy file ACTLDL.SYS to the system disk from the current
operating system software tape. (Refer to your
DocuPrint 96/
DocuPrint 96MX LPS Operations Reference
chapter on
tracking system activity for additional information.)
2. Restart the job to get the accounting page if desired.
OS7350 Unrecoverable I/O error in accounting file.
The system has encountered a system disk error while accessing an
accounting file. The job is aborted.
Action 1. Rerun the job to determine if the failure was an intermittent
error.
2. If the failure recurs, contact your systems specialist or Xerox
Customer Service.
OS7400 Invalid JDE/JDL for online processing.
The system is operating online, but a JDE was specified that cannot
be used online. JDE does not define the HOST type correctly.
Action 1. Specify the correct JDE. (Refer to your
DocuPrint 96/
DocuPrint 96MX LPS Operations Reference
chapter on LPS
processing for additional information.)
2. Restart the job.