Laser Printing System Message Guide

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-100 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
OS6728 DJDE processing error: Feed stock not in stockset
A DJDE FEED option calls out a stock that is not in the stockset
defined for the current cluster.
Action 1. Enter the FEED cluster name to specify a different cluster with
the desired stock.
or
Redefine the stockset to include the desired stock. (Refer to
your
DocuPrint 96/DocuPrint 96MX LPS PDL Reference .)
2. For further recommended actions, refer to messages OS6723-
OS6727.
OS6729 DJDE proc. error: Feed used but no stockset in effect.
The FEED command was used but a STOCKSET statement is not in
effect.
Action Reenter the DJDE command, specifying a STOCKSET. (Refer to
your
DocuPrint 96/DocuPrint 96MX LPS PDL Reference , chapter 4,
“Dynamic Job Descriptor Entries.”)
OS6731 File x processing aborted—data format error.
A required nonblank delimiting character is missing from a record in
the file being processed or was replaced by a different character in
some records. The part of the indicated file that has already been
copied will be deleted from disk. Its data will be printed out and not
copied to disk.
Action 1. Recreate the file, ensuring each record ends with the same
delimiter character. (Refer to your
DocuPrint 96/DocuPrint
96MX LPS Operations Reference
chapter on LPS processing
for additional information.)
2. Resend the job.
OS6732 File x error—no card image data received.
“FILE” command specified “C” for card-image format. However, the
system encountered a DJDE record before any card-image records
were filed. The file will not be copied to disk.
Action 1. Recreate the tape, putting card image records in the correct
location. (Refer to your
DocuPrint 96/DocuPrint 96MX LPS
Operations Reference
chapter on LPS processing for additional
information.)
2. Resend the job.