Laser Printing System Message Guide

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-70 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
OS2910 No accounting file entry for department.
No accounting file was set up at installation for the department name
entered. The system will report data in a “NODEPT” file.
Action Enter the ACCOUNT command to establish a file for the department.
(Refer to your
DocuPrint 96/DocuPrint 96MX LPS Operations
Reference
chapter on tracking system activity for additional
information.)
OS2915 Security violation.
The requested file was protected by ABNORMAL SECURITY = YES
command. An attempt was made to access a file at the wrong logon
level.
Action To access the file, obtain the correct password and log on at Level 5.
(Refer to your
DocuPrint 96/DocuPrint 96MX LPS Operations
Reference
chapter on setting LPS parameters for additional
information.)
OS2920 FEX error, FEXDMP.JDL not found. Recompile FEXDMP.JSL.
FEX cannot find the file you have requested (FEXDMP.JDL) on the
system disk.
Action Recompile the FEXDMP.JSL and reenter the FEX command.
OS2921 Check finishing parameter NVM memory
The printer‘s finishing information may have incorrect non-volatile
data.
Action Restore the values that were displayed at the printer control console.
OS2922 Enter the TOTAL number of sets to create:
This is one of a series of prompts for information to develop the FEX
test case. This message is followed by messages OS2923, OS2924,
OS2008, and OS1136.
Action Enter the number of sets you want printed for the FEX test job.
OS2923 Enter the number of pages per set:
This is one of a series of commands which asks you for information
to develop the FEX test case. Related messages are OS2922,
OS2924, OS2008, and OS1136.
Action Enter the number of pages for each set of the FEX test case job.
OS2924 Enter the FRM name (leave off the .FRM)
This is one of a series of prompts for information to develop the FEX
test case. Related messages are OS2922, OS2923, OS2008, and
OS1136.
Action Enter the form name (without the directory or file-type name) you
wish to use for the FEX test job.