Laser Printing System Message Guide

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-61
OS2670 Enter PQA or SUB INK Command or Abort Report or Print Job.
The color housing is not ready. This message is displayed when the
system requires a print quality adjustment (PQA).
Action Enter the PQA command to initiate print quality adjustment
or
Substitute an ink via the SUBSTITUTE INK command
or
Abort the job.
OS2671 Enter ‘PQA CANCEL’ to cancel Print Quality Adjustment.
This message is displayed when print quality adjustment is pending.
Action Enter PQA CANCEL to stop print quality adjustment
or
Enter CONTINUE to initiate PQA.
OS2672 Enter PQA Command again.
Your PQA command was not completed successfully.
Action Reenter the PQA command again or take other actions specified in
the message.
OS2673 Enter the SUB INK Command or Abort the Print Job.
The printer requires a primary color that is not currently loaded. This
message prompts you with two available options:
Action Enter a SUBSTITUTE INK command
or
Abort the print job.
OS2674 Enter the PQA Start Command.
The black and/or color housing(s) is not ready
Action Enter the PQA START command.
OS2675 Abort the Report or Print Job.
The printer requires a primary color that is not currently loaded. The
message prompts you to perform one of several possible options,
such as:
Action Enter a SUBSTITUTE INK command
or
Load the required color housing
or
Abort the job.