Laser Printing System Message Guide

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-54 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
OS2262 Paper in cluster xxxx is too large
The specified cluster contains paper that is larger than that specified
by the print job
Action Change the paper in the specified cluster.
or
Change the FEED command.
or
Press the <CON> key to print on the larger paper.
OS2263 Paper in cluster xxxx is too small
The specified cluster contains paper that is smaller than that
specified by the print job.
Action Change the paper in the specified cluster.
or
Change the FEED command.
OS2270-OS2286 Clusters with no trays” messages
OS2270Main cluster has no current trays
OS2271Main cluster has no ready trays
OS2275Aux cluster has no current trays
OS2276Aux cluster has no ready trays
OS2280Cluster xxxx has no ready trays
OS2285Cluster xxxx has no trays. Add trays via clu or change
feed
OS2286Cluster xxxx is undefined. Define via clu or change feed
These messages indicate a problem with the specified cluster.
Action 1. Use the CLUSTER command to define the cluster or to add
current trays.
2. If the cluster has current trays, ensure that at least one current
tray is ready.
3. Use the FEED command to override the data-specified clusters.
OS2282 Current feed cluster deleted
The current FEED cluster has been deleted. The system will default
to MAIN. Use the FEED cluster name command to change from the
default, if desired.
Action None.