Laser Printing System Message Guide

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-26 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
OS1331 XPS Accounting aborted
XPS has stopped accumulating accounting data because there is a
disk access error.
Action None.
OS1332 XPS Accounting resumed
XPS resumes the accumulation of accounting data because the
problem causing the abort is resolved.
Action None.
OS1333 XPS Accounting stopped: maximum file count exceeded
XPS has stopped accumulating accounting data because the
number of files has reached the maximum specified by ACFILES in
HIP.LIB.
Action None.
OS1334 Printer alarm is n, level = n
After entering the ATTENTION ALARM command, this message tells
you whether the alarm is enabled or disabled. If you enter the
ATTENTION ALARM ENABLE command, the message tells you that
the value you requested is accepted or provides the current setting if
you have not included the parameter with the command.
Action None.
OS1335 XPS Accounting stopped: no disk space for files
XPS is unable to accumulate accounting data because there is no
disk space for files.
Action None.
OS1336 XPS Accounting enabled
XPS received a request from the server to enable accounting.
Action None.
OS1337 XPS Accounting disabled
XPS received a request from the server to disable accounting or HIP
was unloaded by entering the HIP END command.
Action None.
OS1342 Currently not in Lockout Mode
This message informs you that the LOCKOUT mode has not been
initiated.
Action None.