User's Manual

FEEDER TRAYS
XEROX DOCUPRINT 96/4635/180 NPS GUIDE TO PERFORMING ROUTINE MAINTENANCE 1-7
6. Load paper, following the instructions on the label at the front of
the feeder tray and carefully positioning the paper in the right-
front corner of the tray.
Note: The way you load the paper depends on the paper size
required by the job. For paper longer than 14 inches, load the
long edge against the back guide.
7. Slide both length guides back against the paper.
8. Push the tray in slowly but firmly until it latches. Do not slam the
tray closed. This can cause improper latching or machine
damage.