Printer User Manual
Table Of Contents
- 96/4635/180/2000 Series NPS/IPS Guide to Performing Routine Maintenance
- Table of contents
- Safety
- Introduction
- 1. Feeder trays
- 2. Output trays and bins
- 3. Fuser agent
- 4. Adding dry ink
- 5. Replacing the dry ink waste container
- 6. Cleaning
- 7. Maintenance and support services
- Index

Guide to Performing Routine Maintenance 6-1
6. Cleaning
This chapter describes the cleaning tasks you need to perform
regularly on your printing system.
Cleaning the keyboard, monitor, and the exterior of the printer
controller
Clean the exterior surfaces of your printer controller including
monitor and keyboard, as required. Clean daily, if possible.
Use the following supplies to clean the exterior surfaces:
• Monitor: Use a soft, lint-free cloth dampened with a glass
cleaner. Do not spray the liquid directly onto the monitor since
it may cause damage.
• Keyboard: Use a mild household detergent that has been
poured or sprayed onto a cloth lightly dampened with water.
Do not saturate the cloth; just dampen it.
• Exterior: Use a mild household detergent that has been
poured or sprayed onto a cloth lightly dampened with water.
Do not saturate the cloth; just dampen it.